Four steps stand between you and the Cisco Certified Support Technician (CCST) NetworkingExam materials: choose, enter your email, pay, receive. PassExamDumps keeps checkout McAfee-secured and delivery within 1 minute — 42 practice questions without the waiting room.
Cisco CCST-Networking Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| Security Principles | 10% | - Basic security threats and vulnerabilities - Firewalls and filtering concepts - Access control and authentication - Security best practices |
| Diagnosing Problems | 15% | - Performance and congestion problems - Common error messages and symptoms - Troubleshooting methodology - Connectivity issues and resolution |
| Addressing and Subnet Formats | 20% | - DHCP and NAT concepts - IPv6 addressing and structure - IPv4 addressing and subnetting - MAC addressing and ARP |
| Endpoints and Media Types | 15% | - Network devices: switches, routers, access points - Cabling standards and termination - Endpoint configuration and connectivity - Copper, fiber, and wireless media characteristics |
| Infrastructure | 20% | - Wireless LAN configuration and security - Routing basics: static and dynamic routing - Switching basics: VLANs, trunking, STP - IP services: DNS, NTP, FTP/TFTP |
| Standards and Concepts | 20% | - Ethernet standards and operation - OSI and TCP/IP models - Wireless standards and principles - Network types and topologies |
CCST-Networking Exam: What to Know Before You Buy
The official Cisco Certified Support Technician (CCST) NetworkingExam outline defines 6 domains. The leading three are Endpoints and Media Types (15%), Security Principles (10%), and Standards and Concepts (20%). The full list is in the topics section above, and PassExamDumps's 42 practice questions cover each one.
The CCST-Networking exam is a Cisco certification exam validating the Cisco Certified Support Technician (CCST) NetworkingExam syllabus shown above. It belongs to these credential paths: Cisco Certified Network Associate (CCNA). In a crowded 2026 job market, the credential demonstrates ability visibly — and PassExamDumps prepares candidates with 42 practice questions in PDF, Desktop Test Engine, and Online Test Engine formats.
PassExamDumps issues a full refund if you take the Cisco Certified Support Technician (CCST) NetworkingExam exam within 60 days of purchase and do not pass. The policy does not apply if the exam is taken within 3 days of purchase, if the exam was never actually taken, or to free materials or expired orders, and the candidate name must match the payer name. Submit a scan of your enrollment slip and the official Score Report PDF within 2 days of the exam; claims are processed within 7 days. Alternatively, exchange for two free exam products of equal value and keep your original update service. Orders arrive by email within 1 minute — contact support if nothing arrives within 2 hours.
Online proctored or onsite test center (Pearson VUE, Certiport) Register for the Cisco Certified Support Technician (CCST) NetworkingExam exam through these official channels:
After booking, PassExamDumps delivers your practice questions within 1 minute — preparation starts the same day.
The Cisco Certified Support Technician (CCST) NetworkingExam exam requires 700-800 / 1000 scale to pass, and registration costs USD 125. A failed attempt means paying the same fee again — a readiness check with the PassExamDumps engines before booking is the cheaper option.
Three versions of the same study materials: a printable, expert-prepared PDF with free demo download and instant access; a Desktop Test Engine for Windows that simulates the real exam with two practice modes and works offline; and an Online Test Engine for any browser on Windows, Mac, Android, and iOS with test history and performance review. All 42 practice questions are identical across versions. Every purchase includes 365 days of free updates — pushed to you automatically whenever the bank is revised — plus a 50% renewal discount afterward and unlimited computer installations.
The Cisco Certified Support Technician (CCST) NetworkingExam exam contains 40-50 to complete within 50 minutes. Timed simulation in the PassExamDumps Desktop Test Engine teaches that rhythm before exam day does.
Cisco recommends these training resources for the Cisco Certified Support Technician (CCST) NetworkingExam exam:
Follow the training with steady self-testing — the 42 practice questions from PassExamDumps help you apply theory and fill any gaps the training leaves.
No prerequisites required Since requirements change over time, confirm the latest on the official Cisco exam page before scheduling.
Cisco Certified Support Technician (CCST) NetworkingExam Sample Questions:
Computers in a small office are unable to access companypro.net. You run the ipconfig command on one of the computers. The results are shown in the exhibit.
You need to determine if you can reach the router.
Which command should you use? Complete the command by selecting the correct options from each drop- down lists.
Correct Answer:

Explanation:
To determine if you can reach the router, you should use thepingcommand followed by the IP address of the router. Thepingcommand is a network utility used to test the reachability of a host on an Internet Protocol (IP) network and to measure the round-trip time for messages sent from the originating host to a destination computer.
The Default Gateway in theipconfigresults is typically the router's IP address in a home or small office network. In this case, the Default Gateway is192.168.0.1, which is the address you would ping to check connectivity to the router.
References:=
* How to Use the Ping Command
* Testing Network Connectivity with the Ping Command
To determine if you can reach the router, you should use thepingcommand with the IP address of the router.
* Command:ping
* Target:192.168.0.1
So, the completed command is:
* ping 192.168.0.1
Step by Step Comprehensive and Detailed Explanation:
* ping: The ping command sends ICMP Echo Request messages to the target IP address and waits for an Echo Reply. It is commonly used to test the reachability of a network device.
* 192.168.0.1: This is the IP address of the default gateway (the router) as shown in theipconfigoutput.
Pinging this address will help determine if the computer can communicate with the router.
References:
* Using the ping Command: ping Command Guide
Which two pieces of information should you include when you initially create a support ticket? (Choose 2.)
- A. Details about the computers connected to the network
- B. A description of the conditions when the fault occurs
- C. The description of the top-down fault-finding procedure
- D. A detailed description of the fault
- E. The actions taken to resolve the fault
Correct Answer: B,D 🗳️
Explanation: Only visible for PassExamDumps members. You can sign-up / login (it's free).
A Cisco switch is not accessible from the network. You need to view its running configuration.
Which out-of-band method can you use to access it?
- A. SNMP
- B. SSH
- C. Telnet
- D. Console
Correct Answer: D 🗳️
Explanation: Only visible for PassExamDumps members. You can sign-up / login (it's free).
An app on a user's computer is having problems downloading data. The app uses the following URL to download data:
https://www.companypro.net:7100/api
You need to use Wireshark to capture packets sent to and received from that URL.
Which Wireshark filter options would you use to filter the results? Complete the command by selecting the correct option from each drop-down list.
Note: You will receive partial credit for each correct selection.
Correct Answer:

Explanation:
To capture packets sent to and received from the URLhttps://www.companypro.net:7100/apiusing Wireshark, you would use the following filter options:
* Protocol:tcp
* Filter Type:port
* Port Number:7100
This filter setup in Wireshark will display all TCP packets that are sent to or received from port 7100, which is the port specified in the URL for the API service. Since HTTPS typically uses TCP as the transport layer protocol, filtering by TCP and the specific port number will help isolate the relevant packets for troubleshooting the app's data download issues.
* cp: The app is using HTTPS, which relies on the TCP protocol for communication.
* port: The specific port number used by the application, which in this case is 7100.
* 7100: This is the port specified in the URL (https://www.companypro.net:7100/api).
This filter will capture all TCP traffic on port 7100, allowing you to analyze the packets related to the application's data download.
References:
* Wireshark Filters: Wireshark Display Filters
A support technician examines the front panel of a Cisco switch and sees 4 Ethernet cables connected in the first four ports. Ports 1, 2, and 3 have a green LED. Port 4 has a blinking green light.
What is the state of the Port 4?
- A. Link is up and active.
- B. Link is up and not stable.
- C. Link is up and there is no activity.
- D. Link is up with cable malfunctions.
Correct Answer: A 🗳️
Explanation: Only visible for PassExamDumps members. You can sign-up / login (it's free).
Viewing page 1 out of 9 pages.
Viewing questions 1-5 out of 42 questions.
PDF Version Demo


