Watch the calendar: PassExamDumps sets irregular discounts, especially on official holidays. The CWNP Certified Wireless Network Administrator material — 140 practice questions — gets even more affordable if you time it.
CWNP CWNA-106 Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| IEEE 802.11 Protocols and Devices | 17% | |
| IEEE 802.11 RF Site Surveying | 12% | |
| IEEE 802.11 Network Implementation | 25% | |
| IEEE 802.11 Regulations and Standards | 17% | |
| Radio Frequency (RF) Technologies | 21% | |
| IEEE 802.11 Network Security | 8% |
CWNA-106 Exam: Your Questions, Answered
The CWNP Certified Wireless Network Administrator blueprint spans 6 domains — including IEEE 802.11 RF Site Surveying (12%), IEEE 802.11 Regulations and Standards (17%), IEEE 802.11 Network Security (8%). Spend your hours where the percentages are; the full outline above lists every subtopic.
≈ $274.99 USD per attempt, 70% to pass. Retakes bill the full fee again, so make the first attempt the prepared one — rehearse with the 140 practice questions from PassExamDumps until the mark is comfortably behind you.
90 minutes for approx. 60 questions. Train the pace, don't guess it: the PassExamDumps software and online engines simulate the real test scene and score your performance, so exam day holds no surprises.
No formal prerequisite; CWTS or CWSS recommended but not required Vendors adjust eligibility rules over time — verify the current requirements on the official page (official CWNA-106 exam page) before registering.
Files first: payment triggers an automatic email within a minute — download on unlimited devices, and contact our round-the-clock team if nothing arrives within 2 hours (check spam). Failure is covered: take the corresponding CWNA-106 exam within 60 days of purchase, and if you don't pass, email a scanned enrollment slip plus the official Score Report PDF within 2 days of the exam — we handle it quickly, with the full refund processed within 7 days. Exclusions: exams within 3 days of purchase, candidate names that don't match the payer, and free or expired products. You may instead exchange for two equal-value products free.
Yes — download the free CWNP Certified Wireless Network Administrator demo and inspect real questions before paying. Your purchase then stays valid for 365 days with free updates throughout, renewable afterward at 50% off.
The CWNP Certified Wireless Network Administrator is CWNP's official exam for the CWNA Certification certification, at the Associate / Foundational level. It validates practical, job-relevant skills — which is why employers shortlist certified candidates. Related credentials include CWSP, CWAP, CWDP, CWNE.
CWNP Certified Wireless Network Administrator Sample Questions:
Which unit of measurement is an absolute unit that is used to quantify power levels on a linear scale?
- A. VSWR
- B. SNR
- C. RSSI
- D. dBm
Correct Answer: D 🗳️
In an infrastructure Basic Service Set (BSS), how does the passive scanning process occur?
- A. Client stations broadcast Probe Request frames on all supportedchannels inthe regulatory domain. Nearby access points respond with Probe Response frames. Client stations record information in the Probe Response frames for use in the association process.
- B. Access points broadcast Beacons on asingle channel for which they are programmed.
Nearby client stations listen for Beacon frames and record information found in the
Beacons for use in the association process. - C. Client stations broadcast Probe Request frames on the singlechannel forwhich they are programmed. Nearby access points respond on that channel with Probe Response frames.
Client stations record information found in the Probe Response frames for use in the association process. - D. Access pointsbroadcast Beacons on all channels of each radio within the regulatory domain. Nearby client stations record information found in the Beacons for use in the association process.
Correct Answer: B 🗳️
What problem may exist for a multiple channel architecture(MCA) WLAN when its APs are all operating at full power (typically 100mW)?
- A. The mismatched power between WLAN client stations and APs violates regulatory and
IEEE signal quality requirements. - B. APs operating in the 2.4 GHz band would prevent microwave ovens and analog video camerasfrom functioning.
- C. WLAN client stations can experience the hidden node problem when located near each other within the same cell.
- D. Cell size may be too large, causing co-channel interference to adjacent cells and reducing system capacity.
Correct Answer: C 🗳️
What WLAN system feature is required to produce a scenario with the following configuration on a single access point? (Choose 2)
1. SSID = Guest / BSSID = AA:AA:AA:AA:AA:AA /
VLAN = 22 / Subnet = 192.168.22.0 / RF Channel = 6
2. SSID = Corporate / BSSID = BB:BB:BB:BB:BB:BB /
VLAN = 33 / Subnet = 192.168.33.0 / RF Channel = 6 /User Type A
3. SSID = Corporate / BSSID = BB:BB:BB:BB:BB:BB /
VLAN = 44 / Subnet = 192.168.44.0 / RF Channel = 6 / User Type B
- A. Call Admission Control
- B. Dual-radio AP hardware
- C. Integrated DHCP server
- D. User-based authentication
- E. Virtual Cell with SCA
- F. Multiple WLAN Profiles
- G. Access Categories
Correct Answer: D,F 🗳️
What statement about the SSID is true?
- A. The SSID is a security sessionidentifier used in RSNs.
- B. The SSID must be included in an association request frame.
- C. The SSID is a pseudo-random number assigned to each client by an AP.
- D. The SSID is an alphanumeric value assigned to devicemanufacturers by the IEEE.
Correct Answer: C 🗳️
Viewing page 1 out of 28 pages.
Viewing questions 1-5 out of 140 questions.
PDF Version Demo


